#Dcs A-10C Warthog Free Download Includes

Dcs A-10C Warthog Free Download Includes

DCS: A-10C Warthog is a PC simulation of the U. The A-10A Thunderbolt II, also known as the Warthog, is a flying gun.This free download includes a vast mission area of the Caucasus region and. Note: This is the exact same simulation of the A-10A as featured in DCS: Flaming Cliffs 3. Vergleiche die Preise aller Keyshops und spare beim Kauf eines DCS: A-10A Warthog Game Keys. DCS: A-10A Warthog jetzt g&252 nstig als Steam Key oder Download Key kaufen.

THANK YOU DCS Just want to start off thanking DCS for making a true Simulator. The bad news: when I bought one for an old sidewinder and tried it you will need a usb1.0 connector, it wont work with a usb2.0 that is for sure, the. 00 if you google gameport to usb adapter, there are plenty about. Hi Guys, yup the good news is you can get one for about &163 8.

With the radioвЂ™s set up, a single press of the MIC SWITCH in the proper direction will bring up the COMM MENU interface on your screen. I advise you do not attempt to activate or program your radioвЂ™s under Battery Power, rather wait until the APU and APU Generators or Engine Power is available.RADIO OVERVIEW (CONT)RADIO LOCATION 1 2 3 Radio Location: Left Side of Cockpit 1,2,3RADIO OVERVIEW (CONT)HOTAS THROTTLE MIC SWITCH OVERVIEW Throttle MIC SWITCH has 3 directional functions, each direction activates a radio: MIC SWITCH FWD=VHFRADIO 1 MIC SWITCH DOWN= UHFRADIO 2 MIC SWITCH AFT= VHFRADIO 3 The MIC SWITCH and the RadioвЂ™s work together, you can have the radio set up perfectly, but if you donвЂ™t use the MIC SWITCH, your radioвЂ™s are worthless. They are all activated by the MIC SWITCH on the HOTAS THROTTLE Since Beta 2, it seems to matter when you activate your radio and begin using it, as there is a difference I noticed in radio functionality between radio use on Battery Power and APU/Engine Power. Knowing the frequency ranges and types will help you identify in briefings or radio calls which radio you will need to tune to make the proper contact. It is important to distinguish between the three types of radio: AM-UHF-FM They each have a frequency range that they transmit and receive on. AN/ARC-186(V) VHF AM Radio 1(Radio 1) AN/ARC-164 UHF Radio 2 (Radio 2) AN/ARC-186(V) VHF FM Radio 2 (Radio 3) There is a KY-58 Secure Voice Control Panel that encrypts the radio transmission and it will not be covered For the purposes of this guide, I will refer to the radioвЂ™s from here on out as Radio 1, 2, and 3 as this is the way they lay out from top to bottom.

Note: 3 digits left of the decimal, in the 225 -399 range. Most missions will add an AM or UHF or FM designator to the information given to also help you decide which radio to tune.RADIO FREQUENCIES (CONT) RADIO 2(UHF): The frequency range runs from 225.000 to 399.975 MHz. Watch for this in briefings or in game comms when you are asked to tune to 131.00, it is a safe bet to tune Radio 1 for this job as it falls in itвЂ™s frequency range. Note: 3 digits left of the decimal, in the 116 -151 range.

Note: The EMER FM and AM settings on dial 7 are for selecting the Guard Channel automatically. Note on this radio, the left most knob has a range from 1-15, so if you want 131.00 rotate the first knob to 13, then the one to the right to 1, and leave the ones to the right of the decimal point at 0 Now you can either set a Preset with dial 1 that will show up in window 2 and hit the LOAD button 4 to save the frequency to a Preset, or you can hit the MIC SWITCH FWD to activate the radio. Most missions will add an AM or UHF or FM designator to the information given to also help you decide which radio to tune.RADIO 1 FUNCTION AND TUNING To tune the radio, first turn switch 6 to TR (Transmit/Receive) *Post APU start* Now rotate switch 7 to MAN Use Frequency Selector Knobs 3 to enter the desired frequency. Watch for this in briefings or in game comms when you are asked to tune to 31.00, it is a safe bet to tune Radio 3 for this job as it falls in itвЂ™s frequency range. Most missions will add an AM or UHF or FM designator to the information given to also help you decide which radio to tune.RADIO FREQUENCIES (CONT) RADIO 3(VHF FM): The VHF/FM operates between 30.000 and 76.000 MHz Note: 2 digits left of the decimal, in the 30 -76 range.

They are not for setting this FM radio as a AM radio.RADIO PRESETS OVERVIEW All radios have 20 preset channels available to be programmed in the radios either manually while in the cockpit, or by the mission designer. Note: The EMER FM and AM settings on dial 7 are for selecting the Guard Channel automatically. Note on this radio, the left most knob has a range from 1-9, so if you want 31.00 rotate the first knob to 3, then the one to the right to 1, and leave the ones to the right of the decimal point at 0 Now you can either set a Preset with dial 1 that will show up in window 2 and hit the LOAD button 4 to save the frequency to a Preset, or you can hit the MIC SWITCH AFT to activate the radio. Now you can either set a Preset with dial 1 that will show up in window 2 and hit the LOAD button (under panel 14) to save the frequency to a Preset, or you can hit the MIC SWITCH DOWN to activate the radio.RADIO 3 FUNCTION AND TUNING To tune the radio, first turn switch 6 to TR (Transmit/Receive) *Post APU start* Now rotate switch 7 to MAN Use Frequency Selector Knobs 3 to enter the desired frequency.

Presets are entered in to each radio while the radio is set to MAN on the Frequency Mode Dial. Enter any other frequencies you wish to input into the radio using the steps above and just rotate the Preset Channel Selector Wheel as you go. To enter another Preset, just tune the radio, rotate the Preset Channel Selector Wheel to the Preset Channel you wish to have it on, then hit the LOAD key again. This pairs the frequency to the preset. It will show up in the Preset Channel Indicator WindowIt is a good idea to write what each preset is so you donвЂ™t forget. You do not need to master this functionality as the radioвЂ™s can be tuned manually at any time, but it saves a lot of time.RADIO PRESETS DETAIL Here are the steps: ( I assume you know the dial/switch names by now) All radioвЂ™s are to be tuned when set to MAN on the Frequency Mode Dial Once radio frequency is set, rotate the Preset Channel Selector Wheel to the Preset Channel you wish to have it on.

An easy way to do this is to go into the Mission Editor before you fly the mission and left click on the entity you want frequency info on. Make sure you know all the radio frequencies you need before starting a mission. Some mission briefings either do not list all the frequency's, or may have a frequency incorrectly listed. The frequency displayed remains the last one you entered. Now just rotate the Preset Channel Selector Wheel to one of your programmed numbers and then hit the appropriate MIC SWITCH and voilaвЂ¦.radio nirvanaвЂ¦.congratulations!RADIO FAQ After you have programmed your radio to pair frequencies to presetвЂ™s, and have switched the Frequency Mode Dial from MAN to PRE, rotating the Preset Channel Selector Wheel to your desired Preset will not change the frequency displayed in the windows above the Frequency Selector Knobs.

It only shows that you transmitted on that radio. This does not mean that your message was received by your intended recipient. When you activate a radio command from the menu you will hear your own command and see it on the screen. Make note of this number and using the known frequency ranges listed in this tutorial, you can figure out which radio to use.

If you do not, you will notice your radioвЂ™s not functioning as expected.

Dcs A-10C Warthog Download